To whom may be reading this Post / Blog: After several years of hard work and dreams we have hit a roadblock in this project and it maybe irreversible. I think we could probably say COVID19 has killed this project but it has actually been a combination of events. The new owner of the property…
Author: admin
The boat is currently on the hard at a storage facility, supported by props/stands and covered by tarps. In this report, we shall start the description from inside the hull at the bow and progress to the stern. After, the exterior status will be described from bow to stern. When this was written, all of…
APRIL 2020 No much time to work on the boat during the COVID19 pandemic and so we picked up work that could be done in our garage. We decided to start restoring the teak bowsprit. It had small dings/damages and the varnish was in very poor condition. We started by removing the old varnish. It…
June 2019 – We have found a couple of areas where the fwd cabin bulkhead is rotten. Before we cut out the rotten areas we wanted to try to inject penetrating epoxy and see that would fix it. We first taped the area and drilled holes 2 inches apart. We used clear tape so that’s…